Steel Service Center

Hot rolled pickled

Hot-Rolled-Pickled-Strips-Eng

Diameters on request:

400 - 500 mminternal
800 mm min - 1800 mm maxexternal
The production supervisor evaluates requirements other than the one listed above.
The production supervisor evaluates requirements other than the one listed.
Thickness (mm)
from1,5 to 3
Width (mm)
from400 to 1500
Length (mm)
from600 to 6000
Steels for bending and deep drawing
Hot-Rolled-Pickled-Quality-Eng

High yield steels
Hot-Rolled-Pickled-Quality2-Eng
wbshadow2000-70

Cold rolled

Cold-Rolled-Strips-Eng

Diameters on request:

400 - 500 mminternal
800 mm min - 1800 mm maxexternal
The production supervisor evaluates requirements other than the one listed above.
Cold-Rolled-Narrow-Strips-Eng

Diameters on request:

300 - 400 - 500 mminternal
550 mm min - 1600 mm maxexternal
The production supervisor evaluates requirements other than the one listed above.
The production supervisor evaluates requirements other than the one listed.
Thickness (mm)
from0,4 to 3
Width (mm)
from400 to 1500
Length (mm)
from600 to 6000

Surface finish

  • The surface finish can be shiny, semi-shiny, normal or rough. If the order does not give specifics, the products are furnished with a normal surface finish.
  • In the below table the value limits of the average surface roughness are indicated, for each of the four types of surface finish.
Cold-Rolled-Finish-Eng
Mechanical characteristics
Cold-Rolled-Quality-Eng

Stock condition:

RForged
ICold hardened
wbshadow2000-70

Hot galvanized

Hot-Galvanized-Strips-Eng

Diameters on request:

400 - 500 mminternal
800 mm min - 1800 mm maxexternal
The production supervisor evaluates requirements other than the one listed above.
Hot-Galvanized-Narrow-Strips-Eng

Diameters on request:

300 - 400 - 500 mminternal
550 mm min - 1600 mm maxexternal
The production supervisor evaluates requirements other than the one listed above.
The production supervisor evaluates requirements other than the one listed.
Thickness (mm)
from0,4 to 3
Width (mm)
from400 to 1500
Length (mm)
from600 to 6000

Surface finish

The table below contains hot dip galvanized values of finish.

Hot-Galvanized-Finish-Eng
Steels for bending and deep drawing
Hot-Galvanized-Quality-Eng
Structural steels
Hot-Galvanized-Quality2-Eng
wbshadow2000-70

Cold galvanized electrolytic

Cold-Galvanized-Strips-Eng

Diameters on request:

400 - 500 mminternal
800 mm min - 1800 mm maxexternal
The production supervisor evaluates requirements other than the one listed above.
Cold-Galvanized-Narrow-Strips-Eng

Diameters on request:

300 - 400 - 500 mminternal
550 mm min - 1600 mm maxexternal
The production supervisor evaluates requirements other than the one listed above.
The production supervisor evaluates requirements other than the one listed.
Thickness (mm)
from0,4 to 3
Width (mm)
from400 to 1500
Length (mm)
from600 to 6000
Mechanical characteristics
Cold-Galvanized-Quality-Eng
wbshadow2000-70